HD80 QUICK START GUIDE
About this Guide
This guide is a quick reference for users to install and operate HDIP video
surveillance systems. It provides only basic information regarding the network
recorders and cameras. For further details on installation and operation, please refer
to the Hardware and Software User Manuals.
CONTENTS
Before proceeding, please check to confirm that the box contains the items listed
here. If any item is missing or has defects, DO NOT install or operate the product and
contact AvertX for assistance.
HD80 Dome Camera
Anchors
Screws
Rubber Washers
Quick Start Guide & Installation CD
INSTALLATION
Remove Cover
Align Holes on Wall
Adjust Aim
The HD80 camera can be installed directly onto
a wall or ceiling. Be sure that the structure is
strong enough to support the camera.
1. Remove the camera dome cover.
2. Mark the positions of the 2 screw holes
on the base of the camera at your chosen
location.
3. If necesary, use a 3/16" drill bit to drill the
holes for the anchors.
4. If necessary, drill a 1 1/16" hole for your IP
connection jack.
5. Connect the Ethernet cable to the camera.
6. Affix the camera to the wall or ceiling with
the supplied screws.
7. Adjust the camera to the desired angle.
8. Replace the dome cover. Screw the two
Torx screws on the side of the dome cover
to tightly fasten the cover in place.
32346AA