Logout; Logging In As A Different User - avertX HD810 User Manual

Upgrading the Camera Firmware
Note Make sure the new firmware file is available before starting a
software upgrade. Do not change the file name, or the system
will not be able to update to the new firmware.
1. Download the camera firmware file from
and then unzip or extract the file.
2. Access your camera through the web browser.
3. When you have accessed the camera page, click Setup at the top
of the page.
4. In the setup menu, click the Software upgrade tab on the left side
of the page.
5. Under Upgrade click Browse to locate the firmware file on your
computer.
6. Select the file type (uImage_userland) from the list under Step 2.
7. Click Upgrade. The system will check the upgrade file, and then
upload the file. The upgrade status bar will display on the page.

Logout

Your AvertX camera will automatically log you out when you close your
browser window. If you want to log in as a different user, you will need
to use the logout tab.

Logging In as a Different User

To log in to your camera as a different user, follow these instructions.
1. Click the Logout tab.
2. To log in as a different user, type the appropriate user name and
password, and then click OK
32
avertx.com to a computer