Table of Contents
Advertisement
Restore that restores default settings excluding network settings. A
system reboot is also available; this preserves all settings.
Note:
If a Full Factory Default is used, you will need to use the
Network Camera Manger to find the desired camera(s) again.
Software Version
Software Version lists the software and mcu version currently installed
on your camera.
Software Upgrade
New versions of camera firmware is available periodically and can be
found at http://www.avertx.com/product-downloads/.
Note:
Make sure the software upgrade file is available before starting
the software upgrade.
1.
Click Browse and find the upgrade file.
Note:
Do not change the file name, or the system will fail to find the
file.
2.
Select the file name from the list under Step 2.
3.
Click Upgrade. The system will check to find the upgrade file, and
then start to upload the upgrade file. The upgrade status bar will
display on the page. When it reaches 100%, the viewer will return
to Home page.
4.
Close the internet browser.
5.
Go to the Windows Control Panel and double-click Add or Remove
Programs. Locate the Camera Viewer software on the Currently
installed programs list and click Remove to uninstall the previous
software version.
6.
Open the internet browser again and log in to the camera. The
system will automatically download the new version of the Camera
Viewer software.
40
Maintenance
On the Maintenance page you can export the cameras current
configuration, or import the configuration for a camera.
Note:
Do not import configuration files from different models of
cameras.
Configuration
Export Configuration:
1.
Check the appropriate boxes for information that you want
exported.
2.
Click Export Configurations.
3.
The .bin file will be saved.
Note:
The default location for exported configurations is C:\
Upload (Import) Configuration:
1.
Click Browse in the Configuration Import box.
2.
Select a .bin file that you want to import.
3.
Click Import.
4.
Click Yes when prompted that the import will cause a system
reboot.
Streaming
Video Format
Your AvertX IP camera can transmit three streams of video at the same
time. One stream can be in high definition for recording, and the other
can be a lower resolution used for live display. By using dual streams,
you can display more cameras on the monitor of your recorder without
taxing the CPU.
Video Resolution – Set the resolution and compression codec for each
stream.
Advertisement
Table of Contents
