Storage Management - avertX HD810 User Manual

motion is detected, event images will be uploaded to the appointed
FTP site.
•
Upload Image by E-mail – Select to assign an e-mail address and
configure various parameters as shown in the figure below. When
motion is detected, event images will be sent to the appropriate e-
mail address.
Note: Make sure SMTP or FTP configuration has been completed.
See the Mail and FTP sections for more information.
File Name
Enter a file name in the box, ex. Image.jpg. The uploaded image's file
name format can be set in this section. Select the one that meets your
requirements.
Network Failure Detection
Network Failure Detection – Turn the Network Failure Detection On,
Off, or On By Schedule.
Detection Type – Designate the IP Address that will be tested and how
often (in minutes).
Triggered Action – Designate the actions that will occur upon Network
Failure Detection activation.
Tampering
Tampering Alarm – Turn the Tampering Alarm On, Off, or On By
Schedule.
Tampering Duration – Designate the amount of time (in seconds) that
tampering must occur in order for a Tampering Alarm to activate.
Triggered Action – Designate the actions that will occur upon a
Tampering Alarm activating.
Periodical Event
Periodical recording allows you to record in consistent intervals and
save the files for later viewing.
1. Turn Interval Recording On or Off.
2. Designate the Time Interval (seconds).
38
3. Designate the Trigger Action using the appropriate checkbox, and
then use the dropdown menus to further manage the Trigger Action.
4. Type a file name, and then choose how the file name is multiplied for
multiple files.
Add date/time suffix – add the date/time to the end of the file name for
each interval file saved.
Add sequence number suffix – add a sequence number suffix to the
end of the file name for each interval file saved.
Add sequence number suffix up to x and start over – add a
sequence number suffix to the end of the file name for each file saved
up to x, and then start over.
Overwrite – overwrite each previous interval file with the new interval
file.
Manual Trigger
Manual Trigger allows you to trigger an alarm event and specify which
actions the camera should take when it's triggered.
To Manually Trigger an event, click the
controls.

Storage Management

SD Card
All AvertX IP cameras include an integrated microSD™ card slot that can be
used to record video or images. The card slot is compatible with a
microSD™ card up to 128GB.
Load Device Information – Displays the storage total size and free space
information of the included microSD™ card.
Current Recording Partition – Amount of space designated for recording
on the microSD card.
Format – Allows you to format the microSD card.
Eject – Safely eject the microSD card.
Recording List – Displays a list of files saved to the card. You can delete
files from the card, or save them to your local PC.
button in the camera