Scanning A Long Original ([Long Original]); Specifying The Original Loading Direction ([Original Direction]); Specifying The Binding Position Of The Original ([Binding Position]); Scanning While Removing Dust In The Slit Glass ([Despeckle]) - Olivetti d-Color MF552 Fax Manual

3

Scanning a long original ([Long Original])

Load the long original on the ADF if it cannot be placed on the Original Glass and is larger in the feeding
direction than full standard size (A3 or 11 x 17). There is no need to enter the original size in advance: the ADF
will detect the size automatically.
For details, refer to page 9-10.

Specifying the original loading direction ([Original Direction])

When scanning a double-sided original etc., you can specify the direction in which the original is loaded so
that the vertical direction is set correctly.
For details, refer to page 9-10.

Specifying the binding position of the original ([Binding Position])

When scanning a double-sided original, specify the binding position of the original in [Binding Position] to
prevent the binding position from being reversed.
For details, refer to page 9-10.

Scanning while removing dust in the slit glass ([Despeckle])

When scanning an original through ADF, scanning of original and dust removal from the Slit Scan Glass are
performed alternately, so that the original is always scanned using clean Slit Scan Glass.
It takes longer to finish scanning, compared to normal operation.
For details, refer to page 9-10.
3-22
Option settings for Fax TX
d-Color MF552/452/362/282/222
3.6