Managing Spanning Tree - Quanta Computer T5016-LB8D Use Manual

UANTA COMPUTER INC.

11.3.24 Managing Spanning Tree

11.3.24.1 Configuring Switch Spanning Tree Configuration Page
Selection Criteria
Spanning Tree Admin Mode - Specifies whether spanning tree operation is enabled on the switch.
Value is enabled or disabled
Spanning Tree Forward BPDU - Specifies whether spanning tree for BPDU is enabled on the
switch. Value is enabled or disabled.
Force Protocol Version - Specifies the Force Protocol Version parameter for the switch. The
options are IEEE 802.1d, IEEE 802.1w, and IEEE 802.1s The default value is IEEE 802.1w.
Edgeport BPDU Filter - Specifies whether Edgeport BPDU Filter is enabled on the switch. Value is
enabled or disabled.
Edgeport BPDU Guard - Specifies whether Edgeport BPDU Guard is enabled on the switch. Value
is enabled or disabled.
Uplink Fast - Specifies whether Uplink Fast is enabled on the switch. Value is enabled or disabled.
Configurable Data
Configuration Name- Identifier used to identify the configuration currently being used. It may be up
to 32 alphanumeric characters
Configuration Revision Level - Identifier used to identify the configuration currently being used.
The values allowed are between 0 and 65535. The default value is 0.
Non-Configurable Data
Configuration digest key - Identifier used to identify the configuration currently being used.
_____________________________________________________________________________
LB9 User's Guide
Layer 2/3/4 Managed Switch
1195/1523