Connector Specifications - IBM RT Series Hardware Reference Manual

Connector Specifications
The adapter has a 16-pin connector at the rear of the adapter. The following figure shows the
signals and their pin assignments.
1 Signal ground for vertical sync
2 Vertical sync
3 R1 signal ground
4 Low order red bit (R 1 )
5
R2 signal ground
6 High order red bit (R2)
7 G1 signal ground
8 Low order green bit (G1)
Advanced
Advanced
Color Color
Gr aphics Display
9 G2 signal ground
Graphics Displ
Adapter
10 High order green bit (G2)
11 B 1 signal ground
12 Low order blue bit (B 1 )
13 B2 skmal
~Hound
14 High order blue bit (B2)
15 Signal ground for horizontal sync
16 Horizontal sync
L,
1 3 5 7 9 11 13
15
.I
2 4 6 8 10 12 14 16
MATING FACE OF ADAPTER CONNECTOR
Figure 3. Advanced Color Graphics Display Adapter Connector Specifications
12 Advanced Color Graphics Display Adapter
ay