Table of Contents
Advertisement
If desired, adjust any of these values as follows:
1.
Click in the desired field. The field changes to an editable field appropriate to the value
being changed and the graphic cursor becomes a text cursor.
•
The
field becomes a set date field, with the date in the
Date
format (M)M/(D)D/YYYY. Leading zeroes are not shown.
•
The
Time (local)
time in the format HH:MM:SS (00:00:00 to 23:59:59).
•
The
field becomes a set offset field, with the offset in the format
GMT
±HH:MM (–12:00 to +14:00).
2.
Edit the field as desired to set the proper value. For time, remember to use 24‑hour
time. Leading zeroes are optional.
3.
Press the <Tab> key on the keyboard or click in another field to exit the set date field.
4.
Click the
button to make the date change take affect.
Take
Sync Time to PC button
Clicking the
Sync Time to PC
internal time to the switcher in a set time command.
Use Daylight Saving check box
To turn Daylight Saving Time on and off for North America, select the
check box. When Daylight Saving Time is turned on, the switcher automatically updates its
internal clock between Standard Time and Daylight Saving Time in the spring and fall on the
date that the time change occurs in North America. When Daylight Saving Time is turned
off, the switcher does not adjust its time reference.
NOTE: For Daylight Saving Time in Europe and Brazil, see the
SIS command on page 68.
Time
Administrator Password and User Password fields
The Administrator Password field displays the password required to log on to the matrix
switcher via the Ethernet port with all of the rights and privileges of the administrator. The
User Password field displays the password required to log on to the matrix switcher via
the Ethernet port as a user, without all of the rights and privileges of the administrator.
Passwords are case sensitive and are limited to 12 upper‑case and lower‑case
alphanumeric characters.
Both password fields are masked with asterisks (************) as a security measure.
NOTES:
•
Editing the Administrator Password field while connected via the Ethernet port can
immediately disconnect the user from the switcher. Extron recommends editing
this field using either serial port and protecting the Ethernet access to this screen
by assigning an administrator password to qualified and knowledgeable personnel
only.
•
An administrator password must be created before a user password can be
created.
•
The HTML language reserves certain characters for specific functions (see
on page 70).
Characters
field becomes a set time field, with the
button causes the computer you are operating to send its
FOX Matrix 3200 and 7200 Switchers • Matrix Software
Use Daylight Saving
Set Daylight Saving
Special
78
Advertisement
Table of Contents
