Administrator Password And User Password Fields - Extron electronics MPX 866 A User Manual

Administrator Password and User Password fields

The Administrator Password
matrix switcher via the Ethernet port with all of the rights and privileges of an administrator.
The User Password field displays the password required to log on to the matrix switcher
via the Ethernet port as a user, without all of the rights and privileges of an administrator.
Passwords are case sensitive and are limited to 12 upper-case and lower-case alphanumeric
characters.
While you are logged on as a user, both password fields are masked with asterisks
( ) as a security measure.
************
NOTES: • Editing the
Administrator Password
Ethernet port can immediately disconnect the user from the switcher. Extron
recommends editing this field using one of the serial ports and protecting
the Ethernet access to this screen by assigning an administrator password to
qualified and knowledgeable personnel only.
• An administrator password must be created before a user password can be
created.
• The following characters are invalid or not recommended in passwords:
{space} + ~ , @ = ' [ ] { } < > ' " " ; : | \ and ?.
Edit either password field as follows:
1.
Click in the desired Password
2. Edit the case-sensitive password as desired.
3.
Press the < > key on the keyboard or click in another field to exit the
Tab
4.
Click the Take button to make the password change take effect.
MPX 866 A Media Presentation Matrix Switcher • HTML Operation
field displays the password required to log on to the
field while connected via the
field. The pointer tool becomes a text cursor.
field.
Password
82