Toshiba Stratagy 4 Installation And Maintenance Manual page 76

STRATAGY 4/6/24
INSTALLATION AND MAINTENANCE MANUAL
SEPTEMBER 1994
,
PARAMETER
tmo-serial
tmo-silence
DESCRIPTION
Maximum number of seconds Stratagy waits for a response when communicating
with other peripheral devices through a serial port. Otherwise, Stratagy could
potentially wait forever.
Possible values: 2 - 99 (seconds)
Default: 2
Stratagy 6 and 24 only.
Maximum amount of silence time the system waits before deciding to finish a
recording and hang up. In seconds.
Possible values: 3 - 9 (seconds)
Default: 5
tmo-sound Maximum amount of sound/dial tone time the system waits before deciding to
finish a recording and hang up. In seconds.
Possible values: 3 - 9 (seconds)
Default: 5
user-log If you remove the initial # sign and activate this option, whenever a User ID is
accessed via DTMF, the system will make an entry in the log file specified. The.
log entry consists of the date, time and User ID. This is useful for creating a data
file which can later be analyzed for call distributions and accesses by dates, days,
and times.
Possible values: valid DOS file name. The single quotes are required.
Default: comment line (# set user-log 'USERID.LOG')
baud1 Baud rate for logical serial port 1. This operates on the physical COM port as
defined by set serial-port1 .
Possible values: 300, 1200, 2400, 9600.
Default: 2400
Stratagy 6 and 24 only.
baud2 Baud rate for logical serial port 2. This operates on the physical COM port as
defined by set serial-port2.
Possible values: 300, 1200, 2400, 9600.
Default: 2400
Stratagy 6 and 24 only.
baud3 Baud rate for logical serial port 3. This operates on the physical COM port as
defined by set serial-port3.
Possible values: 300, 1200, 2400, 9600.
Default: 2400
Stratagy 6 and 24 only.
baud4 Baud rate for logical serial port 4. This operates on the physical COM port as
defined by set serial-port4.
Possible values: 300, 1200, 2400, 9600.
Default: 2400
Stratagy 6 and 24 only.
Table 5-I
Stratagy System Configuration Options
- Parameters and Definitions (continued)
5-15