Toshiba Stratagy 4 Installation And Maintenance Manual page 180

STRATAGY 4/6/24
INSTALLATION AND MAINTENANCE MANUAL SEPTEMBER 1994
TOKEN
1 FUNCTION
Defined Tokens (continued)
?( )
Exists in file.
Syntax: ?(ifem,fi/e,uid)
Where:
DEFINITION
item Any alphanumeric string. May also contain %S
variables.
file ASCII text file specified by a DOS file name. Use two
backslashes \\ to signify one backslash \. For example,
to specify the file name C:\STRATAGY\NEW.TXT,
use C:\\STRATAGY\\NEW.TXT.
uid Valid User ID.
Description: Searches the specified file for the specified item. Stratagy
searches the file on a line-by-line basis and the item is found when it
matches an entire line within the file. If the item is found, processing
continues at the User ID specified; otherwise, processing continues with
the next token.
One use of this token is to control the use of a fax-on-demand feature. If
you find that someone is having a document faxed repeatedly to a phone
number (perhaps the phone number of someone who does not want your
fax), you can enter such numbers into a file, then program Stratagy to
check an entered fax number against those in the file and, if it's found,'
branch to a User ID which plays a greeting saying that the entered phone
number is invalid and then hang up. If the entered number were not
found in the file, then processing would continue normally and the fax
would be sent to the requester.
c( ) Start incremental
fax.
Syntax: C( 'Wring'J
Where:
string DTMF digits representing the telephone number that
should be dialed. It may contain %S variables. If it is
the empty string, i.e., " 'I, then Stratagy waits until a
call rings into the fax port.
Description:
Allows you to have a caller request multiple FAX
documents and then to transmit the requested documents with one call.
The <( ) token must be used with the >( ) token. To FAX multiple
documents, first initiate the process with this token and as the caller
requests faxes, add the requested document using the >( ) token. The
fax is sent automatically after the caller hangs up.
4 )
Add incremental
fax.
Syntax: >( "fi/e'?
Where:
file DOS file name of the FAX you want to transmit. Any
valid DOS file name. Use two backslashes \\ to signify
one backslash \. For example, to specify the file name
C:\STRATAGY\NEW.TXT, use
C:\\STRATAGY\\NEW.TXT.
Description: Allows you to transmit more than one requested
document with one call. Before using this token, you must first start
incremental faxing with the <( ) token. See the c( ) token for details.
Table 6-2
Token Programming Language Tokens (continued)
6-14