Remote Access; System - Toshiba Stratagy 4 Installation And Maintenance Manual

STRATAGY 4/6/24
INSTALLATION AND MAINTENANCE MANUAL
SEPTEMBER 1994
3.1.3.1 Accessing Stratagy Using a Local laptop or PC
To access Stratagy from a local laptop/PC, run the
Stratagy Remote software.
1. To access the Stratagy Remote software, enter the
following from the DOS prompt (C:\).
NOTE:
If you are running Windows, exit Windows; do
not use Windows' MS-DOS Prompt option.
If your local laptop uses COMl , enter:
REMOTE /n /f
If your local laptop uses COM2, enter:
REMOTE /2 /n /f
2. When entered correctly, the screen displays the
same information as on the Stratagy monitor (or
would be displayed on the Stratagy monitor).
NOTE:
The screen may be blank because of the screen
saver. If
so,
press the
spacebar.
3.1.3.2 Using Stratagy Locally
Both the laptop/PC and the Stratagy system are active
simultaneously. Use the laptop/PC as you would from the
Stratagy monitor and keyboard. Note, however, that you
cannot upload or download or files.
3.1.3.3 Exiting Local Access
To discontinue local access:
1. Be sure to leave the Stratagy system in the correct
state.
For example, if you want Stratagy up and running
in call processing mode, leave Stratagy at the
Main Menu. If you leave the Stratagy system at the
Stratagy Configuration Utility Menu, etc, that is
where it will be and call processing will not
function.
2. Enter the following to disconnect from the Stratagy
system:
Alt + X
The system prompts:
OK to Exit (Y/N)
Enter Y to exit the Stratagy system.
Enter
N
to continue accessing the Stratagy
system.
3. Disconnect the null modem cable.
3.2 REMOTE ACCESS
Remote access refers to accessing the Stratagy system
via modem from a laptop or PC located at this or another
site. This section discusses:
H Accessing Stratagy remotely
n Using Stratagy remotely
3.2.1 ACCESSING STRATAGY REMOTELY
To access Stratagy from the remote laptop or PC, run the
Stratagy Remote software.
1. To access the Stratagy Remote software, enter the
following from the DOS prompt (C:\).
NOTE:
If you are running Windows, exit Windows; do
not use Windows' MS-DOS Prompt option.
2.
3.
4.
If your remote laptop or PC uses COMl , enter:
REMOTE
If your remote laptop or PC uses COM2, enter:
REMOTE /2
Remote prompts:
Phone number?
Enter the exact digits the Stratagy Remote
software must dial to access the Stratagy system
modem.
For example, if the remote modem is on the
station side of a switch and the Stratagy system
modem is also on the station side of a switch that
is answered by Stratagy, you might use
9,17145555555 ,,,,,, 102 where each comma is a
2-second delay.
Once connected, the screen clears. The Stratagy
Remote software prompts:
Password?
Enter the password. (The password is CommLine,
with the "C" and "L" uppercase.)
When entered correctly, the screen displays the
same information as on the Stratagy monitor (or
would be displayed on the Stratagy monitor).
NOTE:
The screen may be blank because of the screen
saver. If so, press the
spacebar.
3.2.2 USING STRATAGY REMOTELY
Both the remote and the Stratagy system are active
simultaneously. Use the remote as you would from the
Stratagy monitor and keyboard. Note, however, that you
cannot download or upload files.'
3.2.3 EXITING REMOTE ACCESS
To discontinue remote access:
3-2