Toshiba Stratagy 4 Installation And Maintenance Manual page 62

STRATAGY 4/6/24
INSTALLATION AND MAINTENANCE MANUAL
SEPTEMBER 1994
CHAPTER 5
CONFIGURING AND BACKING
UP STRATAGY
1 INTRODUCTION
This chapter provides detailed information about using
the Stratagy Configuration Utility. This utility allows you
to:
n
'
1
n
n
H
Back up the Stratagy system
Define Stratagy system configuration options
Install Stratagy software from the floppy disk drive
Select a Toshiba telephone switch or plug and play
integration
Define how Stratagy and other manufacturer's
telephone systems communicate together
Backing up Stratagy. Involves backing up the database,
greetings, and messages.
Defining Stratagy system configuration options.
Involves setting system-wide parameters for Stratagy
control, including system password, timeout values,
computer configurations, and per port options.
Installing Stratagy software from the floppy disk
drive. Required when upgrading a Stratagy 4 system to
a Stratagy 6 system. It may also be required to re-install
Stratagy System or Prompt software.
Selecting a Toshiba telephone switch or plug and
play integration. If you have a Toshiba telephone
system, selecting the appropriate system automatically
defines the telephone system dial codes, telephone
system tone patterns, and system integration patterns.
Defining how Stratagy and other manufacturer's
telephone systems communicate together. If you do
not have a Toshiba telephone system, selecting the
appropriate system defines the telephone system dial
codes. You would then need to define the telephone
system tone patterns and system integration patterns.
1. Telephone system dial codes: how Stratagy
controls certain dialing actions on the telephone
system.
2. Telephone system tone patterns: tone patterns
Stratagy must recognize when performing
supervised call transfers, etc.
3. System integration patterns: if the telephone
system supports integration, defines integration
behavior of Stratagy with your phone system.
Once configured, Stratagy should be completely
connected to your telephone system. The next step is to
customize Stratagy by programming the User IDS to
define the automated attendant and voice message
system. For details, refer to the Programming section.
This chapter discusses:
n
n
n
n
n
n
n
Accessing, Using, and Exiting the Stratagy
Configuration Utility
Stratagy Backup Utility
Install from A: Drive
Stratagy System Configuration
Toshiba Switch Integration
Toshiba Plug and Play
Other Switch Integrations
2 ACCESSING, USING, AND
EXITING THE STRATAGY
CONFIGURATION UTILITY
IMPORTANT NOTE:
Stratagy will not process calls while
accessing the Stratagy Configuration Utility.
Exiting the Stratagy Configuration Utility
causes Stratagy to re-boot with the new data,
display the Main Menu, and resume call
processing.
2.1 ACCESSING THE STRATACY
CONFIGURATION UTILITY
To access the Stratagy Configuration Utility
Stratagy call processing.
1. From the Main Menu, select Shutdown.
Alt + S
2. Stratagy prompts:
Password?
Menu, exit
Press:
Enter the password. (The default password is
Stratagy, with the first letter uppercase. We
recommend that you change this password in the
Stratagy System Configuration before exiting the
Stratagy Configuration Utility.)
3. Stratagy prompts:
Shutdown the entire system? [NY]
To shutdown the system, enter Y.
4. Stratagy confirms: ,
Really SHUTDOWN the entire system? [NiY]
To shutdown the system, enter Y.
5-l