Toshiba Stratagy 4 Installation And Maintenance Manual page 71

'
STRATAGY 4/6/24
INSTALLATION AND MAINTENANCE MANUAL
SEPTEMBER 1994
PARAMETER
hot-box
DESCRIPTION
If you remove the initial # sign and activate this option, when Stratagy detects a
specific tone, Stratagy "jumps" to a specified User ID. Used to handle incoming
faxes, detect connections from TDD machines for deaf communication, etc.
There are 24 values available. For example:
set hot-box 994
sets all 24 to User ID 994
set hot-box 994 1
sets the first hot-box to User ID 994
Possible values: valid User ID, possibly followed by a hot-box value (1 - 24)
Stratagy 24 Default: comment line (# set hot-box 994)
Stratagy 4 and 6 default: 994
lognam System log file name. This log file contains start-up information, any execution
error information, system actions, and shutdown information.
NOTE:
This file keeps grows slowly It is a good idea to periodically archive or delete it
once or twice a year, whenever you perform preventive maintenance.
Possible values: valid DOS filename
The single quotes are required.
Default: 'Stratagy.LOG'
Ipt-port Printer port Stratagy should use when asked to print a report.
Possible values: 0 (no printer), 1, 2 (port number)
Default: 1
max-dl-inits
Number of simultaneous ports that may go off-hook and dial the telephone
system initialization code. This is necessary because some switches are blocking.
Possible values: 1, 2, . . . . number of ports
Default: 2
max-prompt Number of times a prompt should repeat until deciding to hang up.
Possible values: 1 - 9
Default: 2
msg-log
By removing the initial # sign on this option and defining a valid DOS file name,
Stratagy will log every received message and every User ID that checks for
messages along with the DTMF entered.
Possible values: valid DOS file name. The single quotes are required.
Default: comment line (#set msg-log 'MSG.LOG')
Table 5-l
Stratagy System Configuration Options - Parameters and Definitions (continued)
5-10