Table of Contents
Advertisement
CHAPTER 6
USING STRATAGY WITH A TOSHIBA TELEPHONE
SYSTEM
This chapter
explains the procedures
for programming
the Toshiba proprietary
telephones
for Call Forward and Message Retrieval when using a Stratagy voice
processing system with one of the following Toshiba telephone
systems:
n
PERCEPTION
4000
n
PERCEPTI0N,~,,/I/II
n
STRATA series
NOTE: Stratagy 4 systems may only be used with Strata DK8 or DK16.
Once programmed,
your Stratagy
voice processing
system can answer
calls
when you are busy or not available and can give callers choices when you don't
answer, such as: recording a message, dialing another extension,
or dialing 0 for
assistance.
NOTE:
This chapter
does not include
the procedures
for Call Forward
and
Message
Retrieval with a standard
telephone.
Consult the appropriate
Toshiba
Standard
Telephone User Guide for these instructions.
CALL FORWARD
If you have a PERCEPTION
l/II/,/
x
8
or Strata telephone
system, you will need to
program your telephone
once for
all Forward and Message Retrieval functions.
You will only have to program
your telephone
once, then you can follow the
appropriate
steps for using Call Forward and Message
Retrieval.
Please note that if you have a PERCEPTION
4000 telephone
system , you do
not have to preprogram
any of the keys to forward calls or retrieve messages.
Your Call Forward and Message Retrieval keys have already been programmed,
so all you have to do is follow the appropriate
steps to perform these functions.
NOTES:
1. If you do not have Call Forward
keys, then you can use access codes
instead.
Refer
to the appropriate
User Guide
for the Call Forward
access/cancellation
codes or check with your System Administrator.
2. With most Toshiba proprietary
telephones,
you can store the sequence
of
steps on a Speed Dial button for quick access.
Refer to the appropriate
Quick Reference
or User Guide for your telephone
for information
and
instructions on using Speed Dial buttons.
6-1
Advertisement
Chapters
Table of Contents
