Table of Contents
Advertisement
Group 21 Engine Body
90
Plus d'informations sur : www.dbmoteurs.fr
Install fuel injector
1. Disconnect the fuel inlet connector from the
injector assembly.
2. Put three O-rings on the injector and coat them
with grease.
3. Coat the gasket with grease and attach it to the
injector. Insert the injector assembly into the cyl-
inder head aligning its connector hole with the
rocker case hole.
IMPORTANT! The grease must be high temp.
resistant and must not cover the nozzle holes.
4. Tighten the fuel inlet connector to the specified
torque.
5. Tighten nozzle gland mounting nut to the speci-
fied torque
NOTE! Maintain equal distances between the fuel in-
let connector and the cylinder head before tightening
the gland to the specified torque.
Advertisement
Table of Contents
