Table of Contents
Advertisement
Plus d'informations sur : www.dbmoteurs.fr
Removing the control rack
1. Dislodge the bellows from the grooves of the
control rack and rack bushing installed in the
pump case, and remove the bellows.
2. Remove the set screw from the back side of the
pump case, and pull out the control rack.
Removing tappets
Hook a wire to two small holes (4-mm (0.16 in.) dia.)
on the upper side of the tappet, and pull out the tap-
pet.
Removing the camshaft
Remove two center bearing mounting bolts. Remove
four front cover mounting bolts, and dismount the
front cover. Tap the camshaft end on the drive side
with a soft-head mallet to remove the camshaft and
front cover.
Removing the rear cover
Remove the rear cover mounting bolts. Insert the tips
of screwdrivers into the notch located on the side of
the rear cover, and pry out. Remove the shim.
Group 23 Fuel System
155
Advertisement
Table of Contents
