Volvo Penta D65A MS Workshop Manual page 67

Removing the fuel control linkage
1. Remove each control link (1) from the right- and
left-hand injection pumps.
2. Remove the R. H. link (2) and the L. H. link (3).
3. Remove the link lever (4) and the R. H. lever (5)
on the right side.
4. Remove the link lever (6) and the L. H. lever (7)
on the left side.
Plus d'informations sur : www.dbmoteurs.fr
5. Remove the spring (8) and the L. H. lever (9).
6. Remove each bearing cover (10) on both right-
and left side.
7. Remove the the snap ring (11), the pipe (12) and
the control shaft (13).
8. Remove the R. H. lever bracket (14) and the L.H.
lever bracket (15).
Removing the stop solenoid
1. Disconnect the linkage (1).
2. Remove the stop solenoid (2).
3. Remove the stop solenoid bracket (3).
Auxiliaries removal
67