Table of Contents
Advertisement
Plus d'informations sur : www.dbmoteurs.fr
Fuel Injection Pump Installation:
Left Injection Pump
1. Align the timing marks "9
damper with the pointer. Make sure that bolt inlet
and exhaust valves of the No. 9 cylinder piston is
at top dead center of the compression stroke.
2. Follow the procedures described for the right in-
jection pump.
Adjust injection quantities of pumps
1. Check to make sure the output shaft of the gover-
nor is positioned on the side marked with "0" (no-
injection side).
2. Install governor lever (1) at an angle of 20°.
3. Install links (2) on the right- and left-hand banks,
making sure that the installation length is 62±0.7
mm [2.4±0.028 in.].
4. Install the link (3) on the right-hand bank.
NOTE! Link (3) has a fixed length of 239 [9.3 in.].
Auxiliaries installation
16" on the viscous
●
75
Advertisement
Table of Contents
