Volvo Penta D65A MS Workshop Manual page 14

General information
14
Plus d'informations sur : www.dbmoteurs.fr
Oil Seals
When installing oil seals, carefully observe the follow-
ing points.
Driving oil seals into housings
1. Check the seal lip for damage, and be sure to po-
sition correctly in the housing.
2. Apply a smear of grease to the surface of the oil
seal (to be fitted into the housing bore).
3. Use an oil seal driver shown to guide the seal lip
and drive the outer diameter squarely. To avoid
damage to the oil seal and leaking, never ham-
mer on it directly.
Driving oil seals onto shafts
1. Apply a smear of grease to the oil seal lip.
2. Use an oil seal guide of the type shown when
driving the oil seal over the stepped portion,
splines, threads, or key way to prevent damage
to the oil seal lip.
O-rings
Use an O-ring guide to install an O-ring over stepped
parts, splines, threads, or key way to prevent damage
to the ring. Apply a smear of grease to the O-ring be-
fore installation.