NETGEAR STM150 Appliance Reference Manual page 179

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
Figure 5-16
2. Locate the Sessions Parameters section on screen, and specify the session settings:
• Session Expiration Length. The period after which a session expires and a user must log
in again. This setting applies to all users. From the pull-down menu, select either Minutes
or Hours. Then, in the field to the left of the pull-down menu, enter a number that
represents the minutes or hours. The session expiration length cannot exceed the idle time
period.
Note: To set the time-out period for the Web Management Interface, see
• Idle Time. The period after which an idle connection is terminated and a user musts log in
again. This setting applies to all users. From the pull-down menu, select either Minutes or
Hours. Then, in the field to the left of the pull-down menu, enter a number that represents
the minutes or hours. The idle time period cannot exceed the session expiration length.
3. Click Apply to save the session settings.
Managing Users, Groups, and Authentication
"Changing Administrative Passwords and Timeouts" on page
v1.0, September 2009
3-9.
5-25