ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
Enter the settings as explained in
Note: After you have completed the steps in the Setup Wizard, you can make changes to
the content filtering settings by selecting Web Security > HTTP/HTTPS >
Content Filtering. The Content Filtering screen lets you specify additional
filtering tasks and notification settings. For more information about these settings,
see
"Configuring Web Content Filtering" on page
Table 2-8. Setup Wizard Step 9: Web Categories Settings
Setting
Select the Web Categories You Wish to Block
Select the Enable Blocking checkbox to enable blocking of Web categories, which is the default setting.
Select the checkboxes of any Web categories that you want to block. Use the action buttons in the following
way:
• Allow All. All Web categories are allowed.
• Block All. All Web categories are blocked.
• Set to Defaults. Blocking and allowing of Web categories are returned to their default settings. See
Table 4-1 on page 4-2
that are preceded by a green rectangular are allowed by default; categories that are preceded by a pink
rectangular are blocked by default.
Using the Setup Wizard to Provision the STM in Your Network
Table
2-8, then click Next to go the following screen.
Description (or Subfield and Description)
for information about the Web categories that are blocked by default. Categories
v1.0, September 2009
4-27.
2-25