NETGEAR STM150 Appliance Reference Manual page 76

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
https://<IP_address> or https://<FullyQualifiedDomainName
Note: The STM is accessible to anyone who knows its IP address and default password.
Because a malicious WAN user can reconfigure the STM and misuse it in many
ways, NETGEAR highly recommends that you change the admin and guest
default passwords before continuing (see
and Timeouts" on page
To configure remote management:
1. Select Administration > Remote Management from the menu The Remote Management
screen displays (see
Figure 3-7
2. In the Secure HTTPS Management section of the screen, enter number of the port that you
want to use to access Web Management Interface of the STM. The default setting is port 443,
but you can enter a port ranging from 1024 to 65535. You cannot use some ports such as 2080
and 8088 that might be used by the STM.
This section of the screen also displays the HTTPS hyperlink through which you can access
the Web Management Interface of the STM. The hyperlink consists of the IP address or fully
qualified domain name (FQDN) for the STM and the port number that you have assigned.
3-12
3-9).
Figure 3-7 on page 3-12).
v1.0, September 2009
"Changing Administrative Passwords
Performing Network and System Management