NETGEAR STM150 Appliance Reference Manual page 74

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
1. Select Administration > Set Password from the menu. The Set Password screen displays.
Figure 3-6
2. To modify the administrator or guest settings, select the check box and complete the fields as
explained in Table
Table 3-4. Set Password Settings screen; Administrator and Guest Settings
Setting
User Selection
Select one of the following radio buttons:
• Edit Administrator Settings. Allows you to modify the administrator settings, while the guest
settings are masked out.
• Edit Guest Settings. Allows you to modify the guest settings, while the administrator settings are
masked out.
Administrator Settings/Guest Setting
New User Name
Old Password
3-10
3-4.
Description (or Subfield and Description)
The default user name. For the administrator account, the default name is
admin; for the guest account, the default name is guest.
The current (factory default) password
v1.0, September 2009
Performing Network and System Management