NETGEAR STM150 Appliance Reference Manual page 24

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
STM150 Front Panel
Figure 1-2 shows the front panel ports and status light-emitting diodes (LEDs) of the STM150.
1) Power LED
2) Test LED
Figure 1-2
From left to right, the STM150's front panel shows the following ports and status LEDs:
1. Power LED.
2. Test LED.
3. One non-functioning USB port: this port is included for future management enhancements.
The port is currently not operable on any STM model.
4. One uplink (WAN) Gigabit Ethernet port with an RJ-45 connector, left LED, and right LED.
5. Four downlink (LAN) Gigabit Ethernet ports with RJ-45 connectors, left LEDs, and right
LEDs.
Note: All Gigabit Ethernet ports provide switched N-way, automatic speed-negotiating,
auto MDI/MDIX technology.
The function of each STM150 LED is described in the following table:
Table 1-2. LED Descriptions for the STM150
Object Activity
Power On (Green)
Off
1-8
4) Uplink LEDs
3) USB Port
4) Uplink Port
Description
Power is supplied to the STM.
Power is not supplied to the STM.
v1.0, September 2009
5) Downlink LEDs
5) Downlink Ports
Introduction