NETGEAR STM150 Appliance Reference Manual page 120

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
Table 4-8. Distributed Spam Analysis Settings (continued)
Setting Description (or Subfield and Description)
POP3 Select the POP3 checkbox to enable Distributed Spam Analysis for the POP3 protocol.
(You can enable Distributed Spam Analysis for both SMTP and POP3.)
Action SMTP
POP3
Tag Add tag to mail
subject
Add tag X-NETGEAR-
SPAM to mail header
Send Quarantine Spam Report
Note: Ensure that the Email Notification Server (see
page 6-2) is configured before you specify the quarantine spam report settings.
Enable Select this checkbox to enable the STM to send a quarantine spam report to the
recipient that you have specified on the Email Notification Server screen (see
"Configuring the E-mail Notification Server" on page
Select one of the following radio buttons to specify the frequency with which the report
will be sent:
• Weekly. Reports are sent weekly at the day and time that you specify from the pull-
down menus (weekday, hours, and minutes).
• Daily. Reports are sent daily at the time that you specify from the pull-down menus
(hours and minutes).
4. Click Apply to save your settings. The Distributed Spam Analysis section and the Send
Quarantine Spam Report section each have their own Apply and Reset buttons to enable you
to make changes to these sections separately.
4-22
From the SMTP pull-down menu, select the action that will be
taken when spam is detected by the anti-spam engine:
• Tag spam email. This is the default setting.
• Block spam email.
• Quarantine spam email.
The only option is to tag spam e-mail.
When the option "Tag spam email" is selected from the Action
pull-down menu (see above), select this checkbox to add a tag
to the e-mail subject line. The default tag is "[SPAM]" but you
can customize this tag. The default setting is to add the default
tag to the subject line.
When the option "Tag spam email" is selected from the Action
pull-down menu (see above), select this checkbox to add the
"X-NETGEAR-SPAM" tag to the e-mail header. The default
setting is to add the default tag to the e-mail header.
"Configuring the E-mail Notification Server" on
Content Filtering and Optimizing Scans
v1.0, September 2009
6-2).