NETGEAR STM150 Appliance Reference Manual page 186

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
Figure 6-2
3. Select the Enable checkbox to enable the STM to send logs to an e-mail address.
4. Complete the fields, select the radio button and checkboxes, and make your selections from
the pull-down menus as explained in
E-mailing Logs
Table 6-2.
Setting
Send to
6-4
Table
Settings
Description (or Subfield and Description)
The e-mail address of the recipient of the log file. This is normally a user with
administrative privileges.
Click Send Now to immediately send the logs that you first must have specified
below.
v1.0, September 2009
6-2.
Monitoring System Access and Performance