NETGEAR STM150 Appliance Reference Manual page 92

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
Reloading the Default NETGEAR Certificate
To reload the default NETGEAR certificate:
1. Select the Use NETGEAR default certificate. radio button.
2. Click Apply to save your settings.
Importing a New Certificate
To import a new certificate:
1. Select the Use imported certificate (PKCS12 format) radio button.
2. Click Browse next to the Import from File field.
3. Navigate to a trusted certificate file on your computer. Follow the instructions of your browser
to place the certificate file in the Import from File field.
4. If required, enter the appropriate password in the Certificate password field.
5. Click the upload button.
Note: If the certificate file is not in the pkcs12 format, the upload will fail. Importing
a new certificate overwrites any previously imported certificates.
6. Click Apply to save your settings.
3-28 Performing Network and System Management
v1.0, September 2009