Setting Web Access Exception Rules - NETGEAR STM150 Appliance Reference Manual

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
2. In the Scanning Exclusions section of the screen, specify an exclusion rule as explained in
Table 4-16.
Table 4-16. Add Scanning Exclusion Settings
Setting Description
Client IP The client IP address and optional subnet mask that will be excluded from all
scanning.
Destination IP The destination IP address and optional subnet mask that will be excluded from all
scanning.
Port The port number that will be excluded from all scanning.
Brief Description A description of the exclusion rule for identification and management purposes.
3. In the Add column, click the add table button to add the exclusion rule to the Scanning
Exclusions table. The new exclusion rule is enabled by default.
To disable a rule, select the checkbox in the Enable column for the rule. (There is no other button
to click to disable the rule.)
To delete an exclusion rule from the Scanning Exclusions table:
1. Select the checkbox in the Enable column for the rule that you want to delete.
2. Click the delete table button in the Action column.

Setting Web Access Exception Rules

You can set exception rules for users and members of a group to allow access to applications, Web
categories, and URLs that you have blocked for all other users, or the other way around, to block
access to applications, Web categories, and URLs that you have allowed access to for all other
users. To specify members of a LAN group and to customize LAN group names, see
Users, Groups, and Authentication" on page
4-50
5-1.
Content Filtering and Optimizing Scans
v1.0, September 2009
"Managing