Setup Wizard Step 8 Of 11: Http Proxy Settings - NETGEAR STM150 Appliance Reference Manual

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual

Setup Wizard Step 8 of 11: HTTP Proxy Settings

Figure 2-17
Enter the settings as explained in
screen.
Note: After you have completed the steps in the Setup Wizard, you can make changes to
the security subscription update settings by selecting Global Settings> HTTP
Proxy. For more information about these settings, see
Proxy Settings" on page
Table 2-7. Setup Wizard Step 8: HTTP Proxy Settings
Setting
HTTPS Proxy Settings
Use a Proxy Server to
Connect to the Internet
Using the Setup Wizard to Provision the STM in Your Network
Table 2-7 on page
3-7.
Description (or Subfield and Description)
If computers on the network connect to the Internet via a proxy server, select
the Use a Proxy Server to Connect to the Internet checkbox to specify and
enable a proxy server. Enter the following settings:
Proxy Server The IP address and port number of the proxy server.
User Name The user name that is used for the proxy server authentication.
Password The password that is used for the proxy server authentication.
v1.0, September 2009
2-23, then click Next to go the following
"Configuring the HTTP
2-23