NETGEAR STM150 Appliance Reference Manual page 187

ProSecure Web/Email Security Threat Management (STM) Appliance Reference Manual
E-mailing Logs
Table 6-2.
Setting
Frequency
Select Logs to
Send
Format
Size
5. Click Apply to save your settings.
Sending Log to a Syslog Servers
To enable and configure logs to be sent to a syslog server:
1. Select Monitoring > Logs & Reports from the menu. The Logs & Reports submenu tabs
appear, with the Email and Syslog screen in view (see
2. Locate the Send Logs via Syslog section on the screen.
Monitoring System Access and Performance
Settings (continued)
Description (or Subfield and Description)
Select a radio button to specify how often the log file will be sent:
• When the space is full. Logs are sent when the storage space that is assigned to
the logs is full.
• Daily. Logs are sent daily at the time that you specify from the pull-down menus
(hours and minutes).
• Weekly. Logs are sent weekly at the day and time that you specify from the pull-
down menus (weekday, hours, and minutes).
Select the checkboxes to specify which logs will be sent via e-mail:
• System logs. he system event logs that include all system errors, informational
messages, configuration changes, and system software updates.
• Traffic logs. All scanned incoming and outgoing traffic.
• Malware logs. All intercepted viruses and spyware.
• Spam logs. All intercepted spam, including spam that was detected through the
blacklist, real-time blacklist, and Distributed Spam Analysis.
• Content filter logs. All Web sites, URLs, and FTP sites that are intercepted
because of Web category, blacklist, file type, or size limit violations.
• Email filter logs. All e-mails that are intercepted because of keyword, file type,
file name, password, or size limit violations.
• Application logs. All intercepted application access violations.
Select the types of system logs that will be be sent via e-mail:
• error. All system errors.
• info. All informational messages.
• conf. All configuration changes.
• update. All system software updates.
Select a radio button to specify the format in which the log file will be sent:
• Plain text. The log file is sent as a plain text file.
• CSV. The log file is sent as a comma separated values (CSV) file.
Select the Zip the logs to save space checkbox to enable the STM to compress
the log file.
Select the Split logs size to checkbox to break up the log file into smaller files, and
specify the maximum size of each file in MB. The default setting is 20 MB.
v1.0, September 2009
Figure 6-3).
6-5