Registering The Facsimile Model No - Oki OKIFAX 5400 Maintenance Manual

2.2.2 Registering the Facsimile Model No.

1) Seach the directory in which the system is registered. when the systwm is found, register the
model number.
2) Insert a disk corresponding to the the model into drive A, then press any key. The model number
is displayed and the confirmation screen is displayed.
3) When the model number to be registered is correct, enter [Y]. The program corresponding to the
model number is now registered. If not correct, enter [N]. Then repeat from step 1) again.
40838301TH Rev.1
Remote Management Center System
<< FAX SETTING >>
FAX Disk set
Push any key
Press the Esc key to cancel.
Remote Management Center System
<< FAX SETTING >>
FAX Disk set
Push any key
OOOOOOOOOO
Are you sure (Y or N)? Y
Press the Esc key to cancel.
G - 8