Oki OKIFAX 5400 Maintenance Manual page 121

1. Instllation of the memory board
• In OKIFAX 5400, MEM, 2 or 4MB memory board can be mounted on to the connector CN13
of E17 board.
Note: 2MB: Bosch ver. is STANDARD.
Remove Rear Cover.
Remove the rear cover by re-
moving the two screws S1
and S2 .
Install Memory Board:
First, install the memory board
on to the connector CN13 of
E17 board, and then tighten
the screw to the separation
plate.
Note:
Fit the fixing hooks at anchor positions on the cassette guide, after that, lift the rear cover slightly
and push it inward.
Tighten the two screws S1 and S2.
40838301TH Rev.1
Fig. C.1.1
Fig. C.1.2
2 - 75
Rear Cover
S2
S1
FX050-C2-025
MEM
This toll will
be provided
as an
attachment
FX050VP-C2-026