Oki OKIFAX 5400 Maintenance Manual page 88

No. Item
18 Smooth printing
19 Dual Access
40838301TH Rev.1
Table 2.9.3 (4/6) User's Functions
The documents received in the STD mode can be printed at
the FINE resolution by means of generating one line based on
the two consecutive original lines and printing it between
them.
The documents for transmission can be read into the memory
even while the fax is engaged in another memory transmis-
sion, reception in the ECM or non-ECM mode.
1) Operation of memory transmission while the fax is en-
gaged in a communication (memory TX, memory RX or
print mode RX).
2) Copy while the fax is engaged in a communication (memory
TX or memory RX).
Note: Condition for operation
a) Copy is invalid when the machine is already engaged
in an operation which is using or could use the printer.
3) Call reception while the fax is engaged in scanning
documents for memory transmission when the auto re-
ceive mode is in "FAX" or "T/F" mode, although "TEL"
mode is not valid.
Refer to sub-section 2.9.7 for dual access operation.
For the patterns of dual access refer to the following, Dual
Access Combination Table.
2 - 42
Specifications