Setup; Mounting; Mounting Procedures - Oki OKIFAX 5400 Maintenance Manual

2.

Setup

2.1

Mounting

This sysrem (RMCS Model 20) is used OKIFAX 5400 Facsimile with PC-I/F.
Conceptual connection diagram of RMCS Model 20 with other devices
RS232C
cable
No problem is caused for the basic operation of this system even if no telephone set connected.

2.1.1 Mounting Procedures

1) Before operation, disconnect the power plug of the IBM PC/AT from the system plug socket.
2) Disconect the power plug of OKIFAX 5400 Facsimile, too and set PC-I/F board to the Facsimile.
3) Connect RS232C cable between COM. Port of the IBM PC/AT and PC-I/F board of the Fac-
simile.
4) Connect the power pulg of the IBM PC/AT and the Facsimile and turn their power switch on.
40838301TH Rev.1
Conceptual connection diagram of RMCS with other devices
OKIFAX 5400 facsimile with PC-I/F
PC-I/F board
PSTN
LINE
TEL
Telephone set
G - 3
Remote Fax