Oki OKIFAX 5400 Maintenance Manual page 63

(STNDBY MODE)
F (Press the SELECT FUNCTION key.)
SELECT FUNCTION (OT)
Selection by One-touch key
OT1: DELAYED TX
OT2: BROADCAST/FEEDER TX
OT3: CONFIDENTIAL TX
OT4: RELAY INITIATE TX
OT5: POLLING TX/RX
OT6: REPORT PRINT
*1: In case of Germany, Austria and Switzeland version,
ACTIVITY REPORT message dose not appear on the
LCD display.
OT7: COUNTER DISP (CLEAR)
*2: User can read no. of counter in LCD but can not clear.
*3: User can not select in some countries.
*4: When the service bit is set to "OFF", Funtion NO.11 is
bypassed to the next function NO. (some countries)
S :Effective if the service bit is "ON".
OT8: LOCATION PROGRAM
2
To OT9 or OT10
40838301TH Rev.1
[Prg. Start date (0-9) and start time (0-9)]
[Enter 20-digit (0-9, sp, *, #)]
[Prg. Password 4-digit (0000-9999) & Group No. 2-digit (01-99)]
[Enter 20 digit (0-9), sp, *, # for polling RX]
Selection by YES/NO keys or digit (1 to 5)
*1
1: ACTIVITY REPORT
2: BROADCAST MCF.
3: PHONE DIRECTORY
4: CONFIGURATION
S 5: PROTOCOL DUMP
S LOG. REPORT
Selection by ← key or → key
(Display & Clear)
S
S
*2
*2
Selection by OT, A/D, # or SEARCH
OT: ONE TOUCH KEY PRG.
A/D: AUTO DIAL KEY PRG.
#: GROUP SETTING
2 - 17
COPY COPY
1
To technical program
→ key
→ key
→ key
→ key
→ key
→ key
DRUM COUNTER
→ key
TONER COUNTER
→ key
DRUM (Total) COUNTER
→ key
PRINT COUNTER
→ key
SCAN COUNTER
→ key