Oki OKIFAX 5400 Maintenance Manual page 87

Hide thumbs Also See for OKIFAX 5400:
Table of Contents

Advertisement

No.
Item
12
Broadcast
(Memory transmission)
13
Delayed transmission from the
memory
14
Polling transmission
(To be polled)
15
Polling reception
16
Transmission preparation (Hopper)
17
No toner reception
40838301TH Rev.1
Table 2.9.3 (3/6) User's Functions
Max. 134 remote locations can be specified by the following
means:
• One-touch keys (with of without a group list).
• Two-digit auto dial codes.
• 10 keypad dial number
One delayed time of calling for this feature can be specified
unless any other delayed calling feature has been specified.
The combination 20 delayed broadcast and one immediate
calling of broadcast is possible.
However, the setting of delayed transmission and delayed
broadcast must not exceed the total number of specified time
which is different according to the machine.
For example, 5 specified times:
2 specified time of delayed broadcast and 3 specified time of
delayed transmission.
When multiple locations are specified for one broadcast
(1) The fax prints a broadcast entry report, if specified in
operating sequence.
(2) The fax can print a broadcast confirmation report. (FP +
02 To enable or disable this printout)
The fax can automatically transmit documents at five speci-
fied times from the memory.
Document(s) placed on the feeder or in the memory can be
collected by a remote station.
The fax can collect documents from one remote station.
An operator can prepare documents for transmission even
while the fax is enagaged in message reception. They will be
automatically transmitted upon completion of the reception.
An operator can also prepare documents for transmission
during transmission from memory.
The fax can temporarily store received messages in memory
when toner has run out. The messages are printed when
toner has been newly supplied or an operator presses the
SELECT FUNCTION key followed by the one-touch key No.
10 under the LCD message "MSG. IN MEMORY/REPLACE
TONER CART." in the standby mode.
* TF + 06 (To enable or disable this function)
2 - 41
Specifications

Advertisement

Table of Contents
loading

Table of Contents