Oki OKIFAX 5400 Maintenance Manual page 32

(1) Title of the report
(2) Date and time when the report was printed
(3) Sender ID
(4) Total CALLING and CALLED time
(5) Date of transmission or reception
(6) Time when the communication started
(7) Time span of the fax communication.
(8) Identification of the remote station
Personal ID/Location ID/TSI/CSI/Dial number or space
(9) Communication mode:
CALLING
CALLED
B. C.
CONF=XX
FWD-R (Fax Fowarding RX)
FWD-T (Fax Fowarding TX)
POLLED (polling TX) in case of except for country code=FRE
POLLING (polling RX) in case of except for country code=FRE
POLLED (polling RX) in case of country code=FRE
POLLING (polling TX) in case of country code=FRE
POLL=XX (Bulletin polling)
(10) Number of transmitted pages or received pages
(11) Result code
OK (Note1)/NO/STOP (Note 2)/BUSY/PAPER (Out of recording paper)/S_JAM (Docu-
ment jam)/R_JAM (Recording paper jam)/COVER/COMP (Completion of a broadcast)/
PUNIT (Printer Alarm)/CANCL (Confidential reception T.O.)
Note 1:
Note 2:
(12) Service code
40838301TH Rev.1
(Transmission)
(Reception NG or MEMORY RX)
(Broadcast)
(Confidential reception)
The following cases are included:
• Unmatched handshaking to the received NSF.
• Unmatched password to the received NSC in the polling transmission mode.
The following cases are included:
• The STOP key is pressed.
• The memory cancellation operation removes the message from the active
memory files.
1 - 25