Oki OKIFAX 5400 Maintenance Manual page 18

No. Item
4 Effective reading width
Document width
ISO A4 (210 mm)
[INT'L/FTZ]
NA letter (216 mm)
[US/CANADA]
NA legal (216 mm)
[US/CANADA]
Note Local copy: Pritable reading width in local copy mode
5 Automatic document feeder (ADF)
6 Document skew
7 Document jam detection
8 Document jam removal
40838301TH Rev.1
Table 1.5.1 (2/9) Basic Performance Specifications
Communication
Mode/Paper width
G3/A4
G3/A4
G3/A4
Max. 30 documents: NA Letter or A4 (20-1b/75 gm)
Max. 15 documents: NA Letter or A4 (16-28lb/60-105 gm
Documents shall be placed facedown on ADF stacker.
The first sheet will be fed first in the feeder and will exit
facedown in the document stacker.
Max. 2.6 mm skew over a document of A4 length.
For a document longer than A4 length, occurrence of skew
exceeding 2.6 mm over any A4 length is 0.5% or less.
1) Transmission will stop and line disconnection will occur
2) A jam will also be declared if the document does not
Note: When a jam is detected during message transmis-
Manual release
Specifications
Effective reading
width
208 mm for TX
202.8 mm for local copy
215.1 mm for TX
211.2 mm for local copy
215.1 mm for TX
211.2 mm for local copy
bond paper)
when the end of a document is not detected within 356
mm after scanning begins (except for the long document
scanning. TF + 11)
reach the scanning position within 5.5 seconds after the
start of a document feed.
sion from the feeder, the machine will stop scanning
and disconnect the line, but its receiving capability
will remain valid.
1 - 11
Copy size
A4
Letter
Legal