Rmcs Basic Operation; Activating Terminating The System; To Activate; Entering The Id And Password - Oki OKIFAX 5400 Maintenance Manual

3.

RMCS Basic Operation

3.1 Activating and Terminating the system
Before Activating the system
If the facsimile terminal is equipped with a selector function to "enable" or "unable" remote mainte-
nance, set to "enable" in advance.

3.1.1 To Activate

Enter the following command in the PC-DOS command input state.
C>RMCS
After completing the necessary preparations, the ID and password entry screen is displayed.

3.1.2 Entering the ID and Password

The ID is recorded in the operation report as part of the system operator history. Enter up to 50
alphanumeric characters except ["], [\] for the ID.
Enter the password registered at installation. When the correct password is entered. TEL Directory
menu screen is displayed.
If you enter wrong password three times, ID and password entry screen is closed and return to the
PC-DOS command input state.
40838301TH Rev.1
Remote Management Center System
Copyright (C)1995 Oki Data Co., Ltd.
Copyright (C)1995 Micro Technology Co.
ID [
Password : • • • • • • • • • • • • • •
12/10/1996 18:08 Operator ID [
G - 13
]
] scrn xxxx