Oki OKIFAX 5400 Maintenance Manual page 67

T.F.
No.
01 Service bit
02 Line monitor control
03 Country code
04 Time and date print
05 TSI print
40838301TH Rev.1
Table 2.9.1 (1/6) Service Personnel Initial Settings
Item
Switching serviceman/user operation.
ON :
OFF : Service personnel's features are not
To enable or disable the following functions:
• Drum (Total, Print, Scan), and toner counter
• Protocol dump
• Dial parameters
• etc
Changing the audible monitoring range.
FP +06 (To select the loudness of monitoring)
ON :
OFF :
Note:
Selecting the following country code:
USA, INT'L, GBR, IRL, NOR, SWE, FIN, DEN,
GER, HUN, TCH, POL, SUI, AUT, BEL, HOL,
FRE, ESP, ITA, GRE, AUS, NZL, SIN, HNG
Enables or disables the function of printing local
date and time at the top of the received page.
OFF/ONCE/ALL selectable.
OFF:
ONCE: Time and date are printed at the top of
ALL:
Note:
Switches the function of printing TSI data from
remote fax onto the received pages. TSI is
printed at the leading edge of first reproduced
copy. (Set at receiver.)
When TF04 is set to "ALL", TSI is printed for the
all received pages.
ON :
OFF :
(Reference)
TSI; Transmitting Subscriber Identification
Specifications
Service personnel's features are avail-
able.
available.
clear
Enable
Disable
In case of transmission mode, the moni-
tor will be available during dialling, but
the monitor will be switched off auto-
matically after the elapse of specified
time (about 5 sec.). However, when
TF02 is set to ON, the monitor is avail-
able during communication also.
Time and date are not printed.
the first page only.
Time and date are printed at the top of
every page.
• Set at receiver.
Enable
Disable
2 - 21
Default