Oki OKIFAX 5400 Maintenance Manual page 98

Table 2.9.4 (3/4) User's Initial Settings (Function Program)
P.F.
Item
No.
14 2'nd cassette paper size (option)
15 User language
16 Incoming ring
17 Remote receive
18 Memory and feeder switch
19 Power save mode
20 ECM function
40838301TH Rev.1
Specifications
Selects A4, LETTER or LEGAL 13˜, LEGAL 14˜/
OTHER by this function.
The operator must select the preferable paper
size as the machine cannot detect the paper size
automatically.
Note: OTHER message appears when operating
with MFP terminal.
A choice of 2 languages for LCD and print mes-
sage are available.
Language 1 and Language 2
Instead of ringer circuit, software can control built-
in speaker to ring sound.
To enable (ON) or disable (OFF) or distinctive ring
(DRC) a software generated ring sound to indi-
cate arrival of an incoming bell.
This function is used to transfer the call received
by external telephone (connected to fax) by enter-
ing preset two-digits.
The following combinations are selectable.
00/11/22/33/44/55/66/77/88/99/**/##/OFF select-
able.
Switches the transmission mode between the
memory and feeder.
MEM. TX/FEEDER TX selectable.
Note: Memory or feeder setting can register as
the defult by operating the "F + OT 2".
When the fax becomes the operation state, power
supply is feeding to the all circuits. By adoption of
this system, power consumption at standby state
becomes below 0.5 W
Note: Power save mode is not available
for US/CANADA version.
Pre-heating time (Standby to print):
Approx 20 sec
Eanbles or disables power save mode
ON: Enables
OFF: Disables
Enables or disables ECM (error corection mode)
communication.
ON: Enables
OFF: Disables
2 - 52
Default