Oki OKIFAX 5400 Maintenance Manual page 92

Hide thumbs Also See for OKIFAX 5400:
Table of Contents

Advertisement

Table 2.9.4 (1/4) User's Initial Settings (One-touch key Program)
F+OT
Item
No.
1
Delayed transmission (Tx)
2
Broadcast/memory transmission
3
Confidential transmission
4
Relay broadcast initiate transmis-
sion
5
Polling transmission/reception
6
Report printing
40838301TH Rev.1
Specifications
This function enters a message transmission time(s) and
location(s) for execution at a specified time.
To make a one-time selection of the memory transmission
mode.
Max. 134 remote locations can be specified by the following
means:
• One-touch key (with of without a group list)
• Two-digit auto dial code
• Keypad dial number
When multiple locations are specified for one broadcast,
1) The fax can print a broadcast confirmation report, if
specified in operating sequence.
To program the mail box number 20 digits.
Subaddressing is supported.
Available remote station's mail box numbers:
OKIFAX 2400/2600:
OKIFAX 1000:
OKIFAX 2300/OF-18/OF-150: 01 to 16
OF 38/OF-27:
OKIFAX 2350/OKIFAX 1050: 01 to 08
OKIFAX 2450:
OKIFAX 5200/5300:
OKIFAX 5500/5600:
OKIFAX 5400
This function automatically originates a message call via
relay key station (which must be equipped with OKIFAX
2600, OF-38, OF-27 or equivalent) up to 120 locations for
OKIFAX 2600 and 99 locations for OF-38 or OF-27.
To program relay password.
To enable or disable the relay report.
When auto dial code number 99 is not assigned, relay
broadcast report is not transmitted. When it is assigned,
relay report is transmitted to fax number assigned to auto
dial code 99.
Polling TX:
The documents placed on the feeder or in the memory can
be collected by a remote station.
Polling RX:
The fax can collect documents from one remote station.
Selective Polling is supported.
1. Activity report
2. Broadcast message confirmation report
(Multi location)
3. Phone directory report
4. Configuration report
(Serviceman report if service bit sets to ON.)
5. Protocol dump report
*
TF + 01 (Sets to on Service bit)
2 - 46
01 to 40
01 to 16
01 to 64
01 to 16
01 to 08
01 to 16
01 to 16

Advertisement

Table of Contents
loading

Table of Contents