Oki OKIFAX 5400 Maintenance Manual page 417

(6) Remove three screws 9 which are holding the guide R (2nd) assy 0 to the bottom plate A.
Remove the screw B which is keeping the rear cover C and guide R (2nd) assy 0. Remove
the guide R (2nd) assy 0.
Remove the protect (M) D, guide bracket E, planet gears F and planet gear bracket G.
(7)
(8) Remove the E-ring H which is keeping the sheet link I on the guide R (2nd) assy 0, and pull
out the hinge stand J.
Remove three remaining screws K which are keeping the motor on the motor bracket L, and
(9)
remove the connector off the Stepping Motor M.
(10) Remove two screws N on the Stepping Motor M.
J
K
Rear CoverC
40838301TH Rev.1
I
O
D
Motor BracketL
Detail A
Q
O
TQSB-2PCBP
E G
F
B
A
F - 8
Guide R (2nd) Assy0
H
N
MotorM
9