Oki OKIFAX 5400 Maintenance Manual page 94

Table 2.9.4 (3/4) User's Initial Settings (One-touch key Program)
F+OT
Item
No.
9 User's programs
1. Function program
2. Dial parameters
3. Clock adjustment
40838301TH Rev.1
Specifications
Function program
01: MCF (SINGLE-LOC.)
02: MCF (MULTI-LOC.)
03: ERR. REPORT (MCF.)
04: IMAGE IN MCF.
05: SENDER ID
06: MONITOR VOLUME
07: BUZZER VOLUME
08: CLOSED NETWORK
09: TX MODE DEFAULT
10: T/F TIMER PRG.
11: RING RESPONSE
12: DISTINCTIVE RING
13: 1'ST PAPER SIZE
14: 2'ND PAPER SIZE
15: USER LANGUAGE
16: INCOMING RING
17: REMOTE RECEIVE
18: MEM./FEEDER SW.
19: POWER SAVE MODE
20: ECM FUNCTION
21: REMOTE DIAGNOSIS
22: PC/FAX SWITCH
23: ONE TOUCH PARAM.
Refer to Table 2.9.4 for Specification of the function pro-
grams No. 01 through 23
Dial parameters
1. REDIAL TRIES
2. REDIAL INTERVAL
3. DIAL TONE DETECT
4. BUSY TONE DETECT
5. MF (TONE)/DP (PULSE)
6. PULSE DIAL RATE
7. PULSE MAKE RATIO
8. PULSE DIAL TYPE
9. MF(TONE) DURATION
10. PBX LINE
11. FLASH/EARTH/NORMAL
12. AUTO START
13. DIAL PREFIX
14. IT2 DETECT (FRE only)
Refer to Table 2.9.6 for specification of dial parameter
settings.
Date and time adjustment.
2 - 48