Oki OKIFAX 5400 Maintenance Manual page 114

No. Item
Dial parameters
01 Redial tries
02 Redial interval
03 Dial tone detect
04 Busy tone detect
05 MF (TONE) or DP (Pulse)
06 Pulse dial rate
07 Pulse make ratio
08 Pulse dial type
09 MF (Tone) duration
10 PBX line
11 Flash/Earth/Normal
12 Auto start
13 Access digit
14 IT2 detect (FRE only)
40838301TH Rev.1
Table 2.9.6 Dial Parameters Settings
Switches on the re-dial times to meet the regulations of the
installed country. 0 to 10 tries (in one-try steps)
1 to 5 tries for FRE.
Switches on the re-dial intervals to meet the regulations of
installed country. 1 to 6 minutes (in one-minute steps)
1 to 12 minutes for FRE.
Selects the dial tone detection.
ON/OFF selectable.
ON:
OFF:
Selects the busy tone detection.
ON/OFF selectable.
ON:
OFF:
Selects dialling by multi-frequency or dial pulse.
Selects the dialling pulse rates for the line.
10 pps/16 pps/20 pps selectable.
Selects pulse dial rate.
33%/39%
Selects pulse dial type.
Normal(N)/10-N/N+1
Selects MF (Tone) duration.
75/85/100 ms selectable.
Selects PBX line.
ON/OFF selectable.
ON:
OFF:
Selects the PBX type to meet the exchange requirements.
NORMAL/EARTH/FLASH selectable.
(PBX line origination types)
Enables or disables the function of dialing without pressing
the START key in one-touch dial and 2-digit auto dial modes.
ON:
OFF:
Prefix dialing digits with which PBX connects the fax to the
public line.
OFF/max. 4digit(s) selectable.
Digit:
OFF:
Selects 2nd dial tone detection ON/OFF selectable. (FRE
only)
ON:
OFF:
2 - 68
Specifications
Enable
Disable
Enable
Disable
PBX line
PSTN
Enable
Disable
Enable
Disable
Enable
Disable