Oki OKIFAX 5400 Maintenance Manual page 96

2)-2 Function Program
Table 2.9.4 (1/4) User's Initial Settings (Function Program)
P.F.
Item
No.
01 Message confirmation report
(Single location)
02 Message confirmation report
(Multiple locations)
03 Error report (MCF)
04 Image in MCF
05 Sender ID
06 Line monitor volume
07 Buzzer volume
40838301TH Rev.1
Specifications
Enables or disables the automatic message
confirmation report printing after a single loca-
tion call.
ON: Printing the MCF report.
OFF: Disables this function.
Enables or disables the automatic message
confirmation report printing after a multiple poll-
ing or broadcast.
ON: Prints the MCF report.
OFF: Disables this function.
Enables or disables the automatic error report
printing when transmission error occurs.
(Excepts for service bit "0".)
ON: Printing the error report.
OFF: Disables this function.
Enables or disables the automatic printing of the
image on the first sheet below the message
confirmation report.
ON: Printing the image in MCF report. (Memory
transmission and if the report is printed auto-
matically.)
OFF: Disables this function.
The fax can transmit programmed alphanumeric
message, such as company's name consisting
of up to 32 characters.
Enables or disables the sender ID function.
* (Outside only)
ON: Enables
OFF: Disables
Controls the volume.
OFF/Low/High selectable.
Selects the sound volume of each buzzer (end of
communication buzzer, voice request buzzer
and off-hook alarm) and software ringer from
high, low and middle levels.
Low/Mid/High selectable.
Note: Fixed a low level for key touch tone.
2 - 50
Default