Oki OKIFAX 5400 Maintenance Manual page 103

RESOLUTION & ORIGINAL of Tx mode defult setting can be selected by using → key.
Note1:
EX. FINE / NORMAL
EX. FINE / DARK
Note2: When the service bit is set to "off" and the corresponding bit of XPARA of national code is
set to "off", Ring response and/or Distinctive ring is bypassesd as follows:
Note3: When 2'nd tray is not mounted on OKIFAX 5400, 2'nd paper size is bypassed as follows:
Note4: When CTR board is not mounted on OKIFAX 5400, PC/FAX switch is bypassed as follows:
40838301TH Rev.1
STD / NORMAL STD / DARK
EX.FINE / LIGHT
(bypass)
11:RING RESPONSE
[ X
(bypass)
12:DISTINCTIVE RING
[ X
(bypass)
14:2'ND PAPER SIZE
[ X
15:USER LANGUAGE
[ X
(bypass)
22:PC/FAX SWITCH
[ X
23:ONE TOUCH PARAM
[ X
STD / LIGHT
FINE / LIGHT
PHOTO / NORMAL
PHOTO / LIGHT
← →
] YES( ) NO( )
← →
] YES( ) NO( )
← →
] YES( ) NO( )
← →
] YES( ) NO( )
← →
] YES( ) NO( )
← →
] YES( ) NO( )
2 - 57
FINE / NORMAL
FINE / DARK
PHOTO / DARK