Pppoe Rtdelete - THOMSON speedtouch 610 Cli Reference Manual

PPPoE Commands

pppoe rtdelete

Delete the route specification for a PPPoE link.
Use the command pppoe ifdetach for this interface prior to deleting route configurations.
Note
SYNTAX:
pppoe rtdelete
where:
intf
EXAMPLE:
=>pppoe iflist
PPPoE1: dest : PVC3
Retry: 10 QoS
mode = IP Routing
flags = echo magic
trans addr = pat
route = 10.0.0.2/24 - 172.16.0.5/24 (metric 1)
user name = guest
admin state = down
LCP : state = initial
IPCP: state = initial
=>pppoe rtdelete intf=PPPoE1
=>pppoe iflist
PPPoE1: dest : PVC3
Retry: 10 QoS
mode = IP Routing
flags = echo magic
trans addr = pat
user name = guest
admin state = down
LCP : state = initial
IPCP: state = initial
=>
RELATED COMMANDS:
pppoe rtadd
420
intf = <intfname>
The PPPoE interface name for which to delete the route settings.
default encaps
accomp restart mru
mru = 1492
password = ********
oper state = down
retransm = 10
retransm = 0
default encaps
accomp restart mru
mru = 1492
password = ********
oper state = down
retransm = 10
retransm = 0
Configure a route specification for an upcoming PPPoE link.
LLC
addr route savepwd
link state = not-connected
term. reason =
term. reason =
LLC
addr route savepwd
link state = not-connected
term. reason =
term. reason =
REQUIRED
PPPoE
PPPoE
E-DOC-CTC-20040210-0028 v3.0