THOMSON speedtouch 610 Cli Reference Manual page 398

PPPoA Commands
mru
laddr
raddr
netmask
format
pool
savepwd
demanddial
primdns
secdns
dnsmetric
idle
396
A number between 293 and 8192.
Represents the maximum packet size the SpeedTouch™ should negotiate
to be able to receive.
The default is 1500.
The local IP address of the peer-to-peer connection.
Specifying a local IP address forces the remote side of the PPPoA link (if it
allows to) to accept this IP address as the SpeedTouch™ PPPoA session
IP address.
If not specified, the SpeedTouch™ will accept any IP address.
Typically the local IP address parameter is not specified.
The remote IP address of the peer-to-peer connection.
Specifying a remote IP address forces the remote side of the PPPoA link (if
it allows to) to accept this IP address as its PPPoA session IP address.
If not specified, the SpeedTouch™ will accept any IP address.
Typically the remote IP address parameter is not specified.
The subnetmask associated with this address.
Specifying a subnetmask forces the remote side (if it allows to) to accept
this subnetmask as the PPPoA session subnetmask.
If not specified, the SpeedTouch™ will accept any subnetmask.
The SpeedTouch™ will only request/accept a subnetmask if a DHCP
server pool is associated, i.e. if the [pool] parameter is specified.
The negotiated subnetmask specified in the netmask parameter is
specified in the dotted format (dotted) or in Classless Inter Domain
Routing (CIDR) format (cidr).
The default is cidr.
The name of the free DHCP server pool to which the acquired IP subnet
must be assigned.
Save password (on), if supplied, or do not save the password (off).
The default is off.
Enable (on) or disable (off) the dial-on-demand feature. Nothing happens
until packets are sent to this PPP interface.
The IP address of the primary DNS server.
In case a primary DNS server is specified, the SpeedTouch™ will
negotiate this IP address with the remote side.
If not specified, the SpeedTouch™ will accept any IP address.
The IP address of the (optional) secondary DNS server.
In case a secondary DNS server is specified, the SpeedTouch™ will
negotiate this IP address with the remote side.
If not specified, the SpeedTouch™ will accept any IP address.
A number between 1 and 100.
Represents the DNS route metric to be used for the negotiated DNS
servers. The default is 1.
A number between 0 and 1000000 (seconds).
Represents after how many seconds an idle link goes down.
The default is 0.
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20040210-0028 v3.0